Remove Mold

Certainly mold growth in your home is very undesirable, but there really isn't any reason to be afraid of it, unless you don't have it properly taken care of. Mold is sneaky, it can start growing in places you can't see and remain undetected for a long time. The important thing is that when it is discovered that the situation is taken care of quickly, correctly and permanently.

Are You Worried About the Dangers of Mold?

Certainly mold growth in your home is very undesirable, but there really isn’t any reason to be afraid of it, unless you don’t have it properly taken care of.

Mold is sneaky, it can start growing in places you can’t see and remain undetected for a long time. The important thing is that when it is discovered that the situation is taken care of quickly, correctly and permanently.

The process of removing mold is called:

Mold Remediation

The term remediation simply means: to remedy, or remove something bad or defective, correcting a fault. In this case, the something “bad” is mold.

Using the right procedures and products, mold can be removed from your home or office and you can once again breathe easier knowing there is no further danger.

Mold removal is a process

If you think you may have mold in your home…

The 1st step is to have certified inspectors thoroughly inspect your home.

They will look in places you might never consider looking.
They will give you a report of their findings and a detailed proposal for remediation.

Next, the area in question must be contained.

Rooms must be isolated.
Areas like vents, ventilation ducts, cold air returns and other openings must be sealed off.

Then the mold is treated, preferably with EPA-registered products, which are designed to fight contamination.
If there are items or materials that cannot be remediated, they must be removed and discarded.

Such things as drywall, carpet, upholstery, cabinetry or padding

An extremely important part of remediation is the clean up. It’s essential that all debris and hard to notice particles are properly cleaned up and removed in order to properly complete the process.

HEPA vacuuming is a must.

Next, an EPA-registered anti-microbial product should be applied to prevent regrowth.
Finally, another complete inspection should be held to make sure that all mold has been removed and all areas have been treated with the anti-microbial.

Mold Solutions NW is a full service mold solutions provider with IICRC certified inspectors.

This is the proven process that we follow, a process that will provide you with peace of mind so you can breathe easier.

If you think you have a mold problem, don’t panic, but don’t wait either.

Have a Question About Home Restoration?

Send Us a Message

Mold Remediation Steps

If you have a mold problem in Seattle, or want to make sure you don’t have one in the future, mold removal and remediation can

What Happens When Mold Spores Enter the Body?

Is it really a problem if you are exposed to black mold spores?

The answer to that is definitely yes! Mold not only grows on surfaces inside and outside of your home, but if it is inhaled, it can continue its growth inside your body.

Why is Mold Dangerous

We all experience a little mold every now and then, mainly on food that has been left too long in the refrigerator. But, unless you eat it (who would?), that isn’t the mold that can be dangerous to our health.

Black Mold Poisoning – It’s Coming From Inside The House

Perhaps it’s been a wet summer and you come across it in the garage. Perhaps you’re purchasing a home and find it during an inspection.

 5/5

“We arrived at our vacation home in Ft. Lauderdale and our AC drip pan had overflowed and flooded the place. The repair man recommended these guys, and they did not disappoint! They were very quick, thorough, and helped us through the whole process. I would definitely recommend them!”

~Heather H.

 5/5

“Wonderful company! Great communication from start to finish. From coordinating the water damage to the repairs, their team is in communication with everyone at all times. I’d refer them to anyone!!.“

~Timothy F.

 5/5

“Fast Response. Did quality work in the time they originally estimated. Would refer to friends or family.”

~Dankenstein

Mold Solutions NW

(727) 222-1002

Call Now to Schedule an Appointment!

We are mold remediation, mold abatement, and mold inspection experts serving Seattle, Bellevue, Kirkland, and surrounding areas including Western and Eastern Washington.

We arrived at our vacation home in Ft. Lauderdale and our AC drip pan had overflowed and flooded the place. The repair man recommended these guys, and they did not disappoint! They were very quick, thorough, and helped us through the whole process. I would definitely recommend them!

Wonderful company! Great communication from start to finish. From coordinating the water damage to the repairs, their team is in communication with everyone at all times. I’d refer them to anyone!!

Fast Response. Did quality work in the time they originally estimated. Would refer to friends or family.